Description

Features

• Centre Punch For Marking Centre Lines and Pilot Drill Locations
• Long Taper Punch To Install and Remove Pins and Shafts and To Align Holes
• Starter Punch For Both Starting and Installing Pins and Rivets
• Chisel For Cutting Rivets, Bolts, and Nuts
• Pin Punch For Final Removal To Drive Out Pins and Rivets

Specifications

• Set Piece Count 27
• Material Alloy Steel
• Set Yes

What’s Included?

• 1/4″ x 4-3/4″ Cold Chisel
• 3/8″ x 5″ Cold Chisel
• 7/16″ x 5-1/2″ Cold Chisel
• 1/2″ x 6″ Cold Chisel
• 5/8″ x 6-1/2″ Cold Chisel
• 3/4″ x 7″ Cold Chisel
• 7/8″ x 7-1/2″ Cold Chisel
• 1″ x 8″ Cold Chisel
• 15/16″ x 4-1/4″ Center Punch
• 5/32″ x 5″ Center Punch
• 1/4″ x 5-1/2″ Center Punch
• 3/32″ x 4-3/4″ Pin Punch
• 1/8″ x 5″ Pin Punch
• 5/32″ x 5-1/4″ Pin Punch
• 3/16″ x 5-1/2″ Pin Punch
• 1/4″ x 7″ Pin Punch
• 5/16″ x 7″ Pin Punch
• 1/8″ x 8″ Long Taper Punch
• 5/32″ x 8-1/2″ Long Taper Punch
• 3/16″ x 9″ Long Taper Punch
• 1/4″ x 11″ Long Taper Punch
• 5/32″ x 5″ Starter Punch
• 3/16″ x 5″ Starter Punch
• 1/4″ x 6″ Starter Punch
• 1/8″ x 4-1/2″ Starter Punch
• 5/16″ x 7″ Starter Punch
• 3/8″ x 8″ Starter Punch